eclipse下配置svn（Eclipse configures SVN）.docVIP

eclipse下配置svn（Eclipse configures SVN） Eclipse uses SVN[to rotate] 1. download the required software 1.1SVN server (svn-1.4.3-setup.exe) Http:///project_packages.html 1.2 set SVN to window service (SVNService.exe) I have no download address, and leave your email if necessary 1.3Eclipses SVN plug-in (downloaded with the Eclipse plug-in): 2. configuration server 2.1 install svn-1.4.3-setup.exe 2.2 start run -cmd- into the SVN installation directory under the bin directory server The location of the svnadmin create SVN library running under 2.3cmd (such as: D:\SVN_PRJ) 2.4 copy SVNService.exe to the bin directory under the SVN server installation directory 2.5cmd runs SVNService -install -d -r D:\SVN_PRJ (location of SVN Library) 2.6, if you want to undo the background service, run SVNService -remove 2.7 enter the D:\SVN_PRJ\conf directory, edit svnserve.conf, as follows (remember that the following lines of words can not have spaces): [general] Anon-access = read # anonymous access is read, write, none Auth-access = write # user authentication Password-db = passwd # authentication user database, which allows the user to connect to SVN (user and password stored in the current directory in the passwd file) That statement realm = TESTING # interface appears in the user authentication 2.8 edit the D:\SVN_PRJ\conf\passwd file, the contents are as follows [users] Test = password # when you connect it to the SVN can use the user name test password for password to connect to SVN 2.9 start Settings control panel - service management tools to start the SVNService service Configuring the SVN plug-in under 3.Eclipse 3.1 help find and install the software update - search new features to install new remote site - input an arbitrary input -URL. Http:///update_1.2.x- sure you just added a select - - Subclipse- - select the remote site to complete the implementation of installation and operation 3.2 Window open the perspective -SVN resource library research, right click