净化操作规程（Clean operating procedures）.docVIP

净化操作规程（Clean operating procedures） Operating procedures for cleaning posts I. scope of duties 1 、 responsible for starting and stopping the furnace gas purification system. 2 、 responsible for the ash removal operation of the furnace gas cleaning equipment. 3 、 responsible for the inspection and maintenance work of the whole cleaning system, and keep the records. 4. Responsible for adjustment of related parameters of calcium carbide furnace purification system. 5, when an emergency failure, the operator has the right to stop some or all other operations, timely reporting to the relevant person in charge, and make a record. 6 、 responsible for the coordination with related processes. 7. Be responsible for the health work in the region. Two. Brief description of technological process The furnace gas purification after the recent flue, enter the 1# settlement, the settlement of large particles of dust 50%-60% in furnace gas after dust valve into the scraper, the furnace gas is processed through the device of air cooler for cooling treatment from the 1# settlement. (the temperature below 400oC, up to 230oC space cooler start, cooling) after 2# dust treatment, and then through the coarse fan into the three bag filter after the clean air blower, through the pipe into the gas burning lime kiln as fuel. Three. Preparation before driving 1, first check whether the valve is in the correct position switch, check valve and water cooling water cooling flue flue valve before the gate valve is closed, to confirm the emptying valve (open standby valve) (Quan Guan) confirmed 6 maintenance valve unloading valve (open) to confirm the upper part of the 7 manual butterfly valves (open) (including air blower outlet valve to start a 6 manual valve repair three bag filter on 2), notice of air compressor station sent for nitrogen, nitrogen replacement of purification system. Open the nitrogen main valve and each tank of nitrogen valve, replace more than half an hour, the scraper machine at