摩托车怎样省油（How do motorcycles save oil）.docVIP

摩托车怎样省油（How do motorcycles save oil） How can motorcycle save oil? Time: 2006-05-31 First, how to consider fuel-efficient requirements when buying motorcycles? When buying a motorcycle, consider all the indicators of the motorcycle, such as what kind of road the motorcycle can drive, its maximum speed, acceleration, weight, fuel consumption and so on. When the special requirement of oil quantity index, there must be a requirement of friendship for other indexes, so that the purchased vehicle can save oil and have a certain level of performance index. So what kind of motorcycle is more oily? 1., the two stroke engine motorcycle, compared with the four stroke engine motorcycle, four stroke more fuel-efficient. This is because the two stroke engine, at the end of the scavenging process and exhaust process at the end there is always a moment sweeping hole and the exhaust hole is open at the same time, it will inevitably have a fresh gas flow from the exhaust hole and short circuit, so it is a part of the fuel combustion without loss, fuel consumption is increased. 2., the smaller the displacement of the engine, the more fuel-efficient. Rather than using piston valve of engine fuel with 3. reed valve and rotary valve inlet mode two stroke engine, this is because the reed valve and rotary valve have increased the intake phase angle, the intake more fully, but also prevent the pour spout phenomenon of gas, especially for low speed is more obvious effect of new motorcycle most of the two intake mode, such as the YAMAHA RX125 using the reed valve, SUZUKI A100 is used in rotary valve. Two, how to drive in order to save oil? 1., the fuel consumption curve of the engine is a fishhook shape, and the fuel consumption range is low in the middle speed range. Medium speed generally refers to 3000 ~ 4000 rpm, if less than this speed, the mixing flow to reduce uneven mixing, combustion became bad, fuel consumption increased; the speed is higher than the range, in order to give full pla