rsmsy5_readme（rsmsy5_readme）.docVIP

rsmsy5_readme（rsmsy5_readme） Revision record of RSMSY5NV2 program V2.73 1. improved an error found in the wave train form 2., improved the data format of acoustic wave transmission method for foundation piles Added 5 rows of reserved TEMP: TEMP V2.72 For a user in Yunnan, the suggestion that the file should not be placed in the same sub directory of the original wave file when storing data is put forward In the foundation pile acoustic transmission method parameter setting form, add to set the pile foundation acoustic wave transmission data file path function 1. click the drive select box to select the drive 2., click the subdirectory selection box, you can choose the appropriate path 3. enter the subdirectory name in the new subdirectory text box, and press enter to set up a new subdirectory under the specified path. Note: the subdirectory name entered at this point must be a plain file name without path characters 4., the path of the original wave train file is still rejected when the data path of the acoustic wave data method of the pile foundation is not set V2.71 Improvement of acoustic transmission method for V2.70 1. add the sound wave command button below the parameter settings form. Click this button to enter the form of acoustic wave transmission parameter settings. 2. the pile number, diameter, hole position, section number, and span of the foundation pile can be set up in the form of the parameter setting of the pile foundation acoustic transmission method. 3., when the parameter of setting off the acoustic wave transmission method of the foundation pile is passed, the program will automatically set the parameter setting in the form according to the set parameters: The launching hole, the bottom of the launching hole, accepts the orifice 1, accepts the bottom of the hole 1, accepts the orifice 2, and accepts the bottom of the hole 2, 4. when storing the data file *.PILE, the filename will press the raw file name + section number + .PILE Automatic generat