word实用小技巧（Word practical tips）.docVIP

word实用小技巧（Word practical tips） 1. in the word Chinese characters in Hu, set the font for script and hollow, at the beginning, the page shows the proportion set to 500%. The font is set to teach, and then look at you. Use the Format Painter methods to view the words Bian, tie, FA, zhai. With the words macro view, Zha, Zhai, Bian fa. Tip: enter the Hu, and select it, and then point format - font, and then set the script and hollow, no.. As shown in the following figure: Then, the point of view toolbar shows the ratio of percentage number - OK, as shown below: Very magical, can see the words these three words of Hu Wanjin, this boy in her memory, in Microsoft word, his name has been added. Enter tie again, select Hu, and then click format brush above the toolbar, as shown in the following picture: Then hold the left key, and then select the tie, and then loosen the left key, as shown in the following figure: You can see, tie and Hu word format is exactly the same, you can see that the format brush function can be in a word format brush into another word format, so that you can save the operation. The macro functions mentioned below can also improve the efficiency of office by replacing the steps with one step. Its operation is as follows: Enter the Fa, click tools macro macros, as shown below: In the pop-up window, take a name for the macro, such as test, in macro S, set to the word document that you are working on, and then click OK, as shown in the following figure: Then point font format, and then set the script and hollow, at the beginning, the last point of the stop recording, as shown below: Then enter Zhai, select it, and then click tool macro macro macro name, select test run, as shown in the following figure: As you can see, the operation in the front is the same as the operation. (note that there may be no Hu Wanjin in it, because the hollow is grayed out, and I dont know why. Its useful for Acer to want to learn, and of course, macro functions arent just tha