墨盒断线或堵头的处理（Treatment of broken or blocked cartridge）.docVIP

墨盒断线或堵头的处理（Treatment of broken or blocked cartridge） The following contents are reproduced from the Internet.] Page sixth: cartridge broken or plug treatment CANON, HP, LEXMARK and other nozzles with ink cartridge, after the occurrence of broken lines or plug treatment The common features of CANON, HP and LEXMARK with the head of the cartridge is in the upper side of the cartridge or vent (and refilling hole), the hole in the production for filling ink cartridges, used to keep balance when using internal and external pressure. The normal sign of the nozzle is that the tissue is lightly pressed at the nozzle to allow the ink to diffuse evenly. Otherwise, there is a broken line or plug, of course, do nozzle inspection can also see. Several causes of disconnection or plug are usually run out of empty cartridges placed for a long time before filling ink, the nozzle is easy to dry and blocking in ink state; the addition of ink when handled properly, such as outside the improper pressure adjustment, can also lead to breakage phenomenon. The processing method is: to find a clean glass (or other plane) a few drops of water, the cartridge nozzle immersed in water for two to ten hours (depending on the severity of plugging, careful not to wet contact), and then tissues scrub nozzle can smooth ink exudation is good. If there is only slight exudation, the air can be blown or pumped into the ink box from the vent hole, and it is better to see the ink flowing out of the nozzle. As long as the nozzle or nozzle line is not damaged, this method can solve most of the problems with the cartridge. There have been records of the empty cartridges placed for nearly a year using this method. EPSON printer cartridge cartridge after ink processing Earlier on how to determine the plug and broken line. Most people would have broken mistaken plug, in fact if not months, or to remove the cartridge for a long time, generally do not block the head, mouth dry ink nozzle is generally not to change t