压铸模具设计,无锡UG模具设计培训,无锡UG培训,proe培训,大师驾临课堂学模具设计就业有出路!（Die casting mold design, mold design of Wuxi Wuxi UG training, UG training, proe training, master class to learn mold design employment way!）.doc

压铸模具设计,无锡UG模具设计培训,无锡UG培训,proe培训,大师驾临课堂学模具设计就业有出路!（Die casting mold design, mold design of Wuxi Wuxi UG training, UG training, proe training, master class to learn mold design employment way!） Wuxi mold design training Wuxi UG training, Wuxi plastic mold design training, Wuxi casting mold design training, Wuxi die-casting mold design training, Wuxi Jinding mold company Zhu GongDie casting mold is a big class in the mold. With the rapid development of automobile and motorcycle industry in our country, the die casting industry has ushered in a new period of development. At the same time, it also puts forward higher requirements for the comprehensive mechanical properties and life expectancy of the die casting die. To meet the performance demand increases only rely on the new mold material is still difficult to meet, must be all kinds of surface treatment technology is applied to the surface treatment of casting molds for die-casting die to achieve high efficiency and high precision and high service life to. In all kinds of moulds, the working conditions of die casting die are more severe. Pressure casting is the molten metal under high pressure and high speed full mold and die-casting molding, in the process of repeated contact with hot metal, so the casting mold has higher heat resistance, thermal fatigue wear resistance, corrosion resistance, impact toughness, red hardness, good releasability etc.. Therefore, requirements of surface treatment technology for die-casting die high in recent years, a variety of new technologies of die casting mould surface treatment are constantly emerging, but in general can be divided into the following three categories: (1) improved the traditional technology of heat treatment process; (2) surface modification technology, including surface diffusion, heat treatment the surface strengthening, the electric spark strengthening technology; (3) coating technology, including chemical plating etc.. 2 Surface Modification Technol