电脑开机自检（Computer self test）.docVIP

电脑开机自检（Computer self test） The following methods allow novice operators to speed up boot on Windows XP!!! First, the hardware factors that affect the starting speed The main hardware that affects the startup speed of a computer is the motherboard and hard disk, and memory, which has little to do with the CPU. The motherboard is a base for various computer accessories. It has to do a lot of work at the boot, such as self checking, searching various ports and various external devices. Therefore, to reduce the self-test time, reduce the external equipment and improve efficiency, can improve the start-up speed. If the computer connects to the scanner, USB, hard disk and other peripherals, it may slow down the systems start-up speed. It is recommended that you connect only when you need to use these peripherals, and that the USB device can be connected after startup. The main factor determining the performance of the motherboard is the motherboard chipset. The main factor determining the startup speed is the disk performance and driver performance of the motherboard chipset. In addition to booting up the computer, the time it takes to start the computer is primarily to read system files from the hard disk. The hard disk works by reading and writing data on a high-speed rotating disk by moving a magnetic head. Then the higher the disk speed, the more data you read in unit time, which is very beneficial for system startup. In addition, fast search time and large cache hard disk can also significantly improve startup time. Reduce the boot disk scan latency, and when the Windows log records a non normal shutdown, a reboot caused by the crash, the system automatically runs ScanDisk at boot time. By default, will wait for 10 seconds before the scan of each partition, if each partition will have to wait 10 seconds to start a scan, plus the scan itself needs time, will take a long time to complete the startup process. In this case, we can set the wait time to cancel the disk sca