混凝土后浇带（Concrete back pouring band）.docVIP

混凝土后浇带（Concrete back pouring band） [reply] [search] [] [] third flowers affixed to the top floor of 2008-5-9 12:27:00 After construction, the pouring zone is divided into the post pouring settlement zone, the post pouring shrinkage band and the post pouring temperature zone, which are used to solve the differential settlement of the high-rise building and the lower skirt room, the shrinkage deformation of reinforced concrete and the temperature stress. This kind of back pouring belt has the function of many kinds of deformation joints, and the design should take the function of one kind as the main and other functions as the auxiliary. The construction of the pouring belt is the whole building, including the foundation and L: part of the structure in construction cracks (seam is very wide, it is known as the belt), to be completed the main structure, after pouring concrete filled after the seam that does not exist, not only in the whole construction to solve the high-rise the main building and the podium in low differential settlement, and achieve the purpose without permanent deformation joint. Usually in the design, we are writing practice in the structural design of general description, are as follows: after pouring was mixed with expansive concrete agent, water curing concrete limit expansion rate is greater than or equal to 14 days increased 20% in the pouring of beam and slab reinforcement across 0.015%. after pouring belt should be the main structure completed the expansion of concrete pouring for 60 days and then stable settlement than the adjacent concrete strength of a high level of. In high-rise buildings, due to the need of function and form, often the high-rise building and the podium low rise together, most of the main building surrounded the podium. From the traditional view of the structure, to high-rise building and podium disengaged, which requires setting deformation joint; but the construction requirements and dont want to see a joint. Because th