混凝土开盘鉴定（Concrete opening appraisal）.docVIP

混凝土开盘鉴定（Concrete opening appraisal） Concrete opening appraisal A set of commercial concrete mixing station by providing, you only need to provide: inspection, inspection lot, construction record, pouring application, slump measurement. 28 after mixing station also provide test block report. Field mixing: provide their own: inspection, construction records, raw materials and mix proportion and construction inspection lot, appraising and pouring application, slump measurement. Provision for casting before concrete opening. After the concrete pouring of concrete inspection: In accordance with the code for acceptance of construction quality of concrete structures, GB50204-2002 stipulates that the proportion of concrete used for the first time shall be evaluated by opening. In actual production, the proportion of concrete used for the first time shall be evaluated by opening, and at least one group of 28d standard specimens shall be retained to verify the consistency between the actual quality of concrete and the design requirements. Construction units should pay attention to the accumulation of relevant information, in order to improve the design level of mixing ratio, the content of concrete opening appraisal is as follows: Identification of concrete opening shall be carried out by the construction unit, organization supervision (construction) unit in concrete mixing units and on-site agitation, which shall be carried out by the construction unit, organization supervision (construction) unit. Participants are the project technical supervisor of the construction unit, the supervision engineer of the supervision unit, the project technical leader of the construction unit and the quality inspection department of the concrete mixing unit. Opening appraisal final results shall be signed by the participating personnel representative units. The following information should be provided for opening appraisal: 1) application form or supply requisition for concrete mix; 2) the de