混凝土留样（Concrete retention）.docVIP

混凝土留样（Concrete retention） Provisions for the retention of concrete and mortar blocks Sampling and making of concrete specimens (1) mixing concrete on site; According to code for acceptance of construction quality of concrete structures ( GB 50204-2002 And concrete strength test and evaluation Standard GBJ107 - Eighty-seven A test specimen used to inspect the strength of concrete members of a structural member shall be placed in the concrete site Point random extraction. The sampling and specimen retention shall comply with the following provisions: One Per mixing system One hundred Disk but not more than One hundred Cubic meter of concrete of the same proportion, the number of sampling shall not be less than once; Two The concrete of the same mixing ratio is not enough for each working class One hundred The number of samples shall not be less than once; Three When a continuous casting exceeds One thousand Cubic meters of concrete of the same mix ratio Two hundred Sampling must not be less than cubic meters At one time; Four The concrete on the same floor and of the same proportion shall be sampled not less than once; Five , At least one set of standard curing specimens shall be retained at each sampling, The number of retention groups for the same curing specimens shall be based on actual needs Determine。 (two) the same condition curing specimen for structural entity inspection; In accordance with the provisions of the code for acceptance of construction quality of concrete structures, the same condition curing specimens are used for structural entity inspection The method of detaining and the quantity of sampling shall comply with the following provisions: One , The structural entity test shall be carried out for the important parts involved in the safety of concrete structures, The contents include concrete strength, steel The thickness of the tendon protection layer and the items stipulated in the contract of the project. Two The specimens under the same conditio