各型板材比较（Each type of panel is compared）.doc

各型板材比较（Each type of panel is compared） What are the common boards in the wardrobe? Number of visits: 1724 reward points: 0 | solution time: 2011-5-5 11:49 | questioner: the big four beauty mn The best answer is that the plank is a big item in modern home decorating material, so the average consumer must have a basic understanding of them. Plate material classification can be divided into solid wood, artificial board two broad categories; According to the molding classification can be divided into solid board, splint, fiberboard, decorative panel, fire prevention board and so on. 1, solid plank as the name implies, solid plank is to use complete wood to make wood plank. These boards are durable and natural, and are selected for decoration. But because this kind of plank cost is high, and construction craft requirement is tall, use in decorating is not much. The solid wood is generally classified according to the actual name of the plate, and there is no uniform standard. At present, besides the floor and door fans will use solid wood, generally we use the plate of artificial processing. 2. Splint splint, also known as plywood, and in the line, the fine core board. A single sheet or sheet with a thickness of one millimetre thick. It is the most commonly used material to make furniture by hand. The splint is generally divided into 3 mm, 5 mm, 9 mm, 12 mm, 15 mm and 18 per cent. 3. Decorative panel decorative panel, commonly known as panel. It is to cut the solid wood to the thickness of 0.2mm thin wooden skin, with the splint as the base material, through the adhesive process to make the decorative plate with the decorative effect of the veneer. It is a special type of splint, with a thickness of 3 mm. 4. Fine woodworking board, commonly known as large core board. The large core board is made from two pieces of veneer glued together. The large core board is cheaper than the thin core board, its vertical (the core material to differentiate) the bending strength is poor,