bios（BIOS）.docVIP

bios（BIOS） Explain Each motherboard is different Time/System Time time / system time Date/System Date date / system date Level 2 Cache two level cache System Memory system memory Video Controller video controller Panel Type LCD screen model Audio Controller audio controller Modem Controller modem (Modem) Primary Hard Drive main hard disk Modular Bay module bracket Service Tag service label Asset Tag asset labels BIOS Version BIOS version Boot Order/Boot Sequence startup order (system search order of operating system files) Diskette Drive floppy disk drive Internal HDD built in hard disk drive Floppy device floppy drive device Hard-Disk Drive hard disk drive USB, Storage, Device, USB storage devices CD/DVD/CD-RW Drive drive CD-ROM device drive Modular Bay HDD modular hard disk drive Cardbus NIC Cardbus bus NIC Onboard NIC onboard NIC Boot POST boot self-test (POST) hardware check level is set to MINIMAL (the default) is the poweronselftest upgrade only in BIOS, memory module to change the self starting or not completed the first case of inspection. Set to THOROUGH, then perform a full set of hardware checks when booting. Config Warnings warning: this option is used to set the alarm in power adapter system using low voltage or other support configuration, set to DISABLED to disable the alarm, the alarm is set to ENABLED Internal Modem built-in modem: use this option to enable or disable the built-in Modem. After disabled is disabled, Modem is not visible in the operating system. LAN Controller network controller: use this option to enable or disable the PCI Ethernet controller. After disabling, the device is not visible in the operating system. PXE, BIS, Policy/PXE, BIS, Default, Policy PXE BIS policy: this option controls how the system handles without authentication (starting the overall service Boot Integrity Services (BIS)) authorization request. The system can accept or deny BIS requests. When set to Reset, the BIS will be re initialized and set to Deny next time