砂泵高级应会（The pump should be advanced）.docVIP

砂泵高级应会（The pump should be advanced） The pump should be advanced Fill in the blanks 1, the main view should reflect the parts of the more prominent (shape) features. 2, the specific speed of 400 of the pump is (mixed flow pump). 3, the pump shaft is used to drive (impeller) rotation. 4 centrifugal pump is generated by the rotation of the impeller (Li Xinli) to work. 5, according to (allowing suction vacuum) can be calculated centrifugal pump installation height. 6, the axial flow pump inlet bell mouth is to minimize the loss of water into the impeller (impeller). 7, for the axial flow pump, the geometric installation height is (submerged depth). 8 (mixed flow pump) has the advantages of high efficiency, wide efficiency, wide application range and so on. 9, sewage pump is the drainage system (special) machinery. 10, the number of teeth (the more), that is, the finer the serration. 11, Chinas policy of safety in production is (safety first, prevention first, comprehensive treatment). 12, safety production is the unity of safety and production, whose aim is safety (promotion) production, and production must be safe. 13, in the protection of production work objects, (people) is the first. 14, from the macro point of view, according to statistics, the cause of the accident, the main reason is that (human error) and (unsafe behavior). 15, the three E countermeasures for accident prevention are (Engineering Technical Countermeasures), (safety education countermeasures), and (safety management measures). 16, three no harm refers to the workers (dont hurt yourself) (not to hurt others _) _, (not hurt others). 17. The most basic characteristics of an accident are causality, randomness, latency, and prevention. 18, in front of the job should be put on good (labor protection products). 19, security signs are divided into four categories: Prohibition (sign, warning sign, instruction sign and prompt sign). 20 production units, the use of new technology, new technology, new materia