墙砖和地砖（Wall tiles and floor tiles）.docVIP

墙砖和地砖（Wall tiles and floor tiles） Wall tiles and floor tiles labels: tile decoration A wall tile can not be mixed: indoor tiles according to the location of the shop is divided into wall tiles and floor tiles. Strictly speaking, wall tiles are pottery, tiles are usually porcelain products, and their physical properties are different, both from choose clay ingredients to the firing process are very different, the water wall tile rate of about 10% or so, many times higher than the water absorption rate of only 1% of the ground brick. Bathrooms and kitchen floor should be paved with low water absorption tiles, because the ground will often wash with a large amount of water, so that tiles can not be affected by water vapor, do not absorb stains. Earthenware is glazed tiles, water content is relatively high, it is generally more crude side, and this is also conducive to the adhesive to affix red brick wall. Tiles are not easy to stick firmly on the wall, wall tiles used in the ground will absorb too much water and become difficult to clean, it is obvious that walls and floor tiles can not mix. Two floor tile and wall tile laying Make sure the floor is level Before the tiling should clean up grass, such as wall with lime paste, latex paint, wallpaper and other decorative objects on the ground, or dirt, must be clean, otherwise the cement mortar and base weak bond; in addition, if the wall itself has cracks, should be properly dealt with before sidewalks to free days after the basic structure the brick wall cracks bigger cause cracking or falling; and the cement wall to nap, or for the smoothness of the verticality of the ground and wall of the gap is too large, but also with cement mortar leveling treatment. Laying order is exquisite Affixed to the floor tile should be inward and outward paste, such as the ground slope or floor drain, should pay attention to the direction of drainage to find the slope; wall tiles should be down to the upper cover; for the sake of beauty,