PCL编程（PCLS programming）.docVIP

PCL编程（PCLS programming） Is LC easy? Some people say its easy to learn, and more people say its hard to learn. My view is that it is easy to get started. There is always an easy way to get started. Many people have bought books on PLC, and if I look at it from the beginning, I dont think it will be enough. Because abstract and hollow occupy whole brain, a sentence faint! Learn to have a programmable controller and a simple programmer. If not, in a word, learn not. Because you cant verify right and wrong. How to learn, my way is to go straight to the theme. The practice is as follows: 1. Recognize the difference between ladder diagram and relay control schematic diagram: Relay control principle diagram of the element symbol, a normally open contact, normally closed contact and coil, in order to distinguish them, the symbol on the edge of the label such as KM, KA, KT in different devices, but the number of the contact is limited. In PLC trapezoidal diagram, there are often open and often closed contacts, and on the side of it can also be marked X, Y, M, S, T and C as different soft devices. Its greatest advantage is that the same marked contact can be repeated at different stages. The relay fails to do so. The coil is used in the same way that different coils can only appear once. 2, the classification of programming components: programming element is divided into eight categories, X for input relay, Y for the output relay, M for state relay for auxiliary relay, S, T for counter for timer, C, D for the data register, and pointer (P, I, N). The function of various kinds of components, various versions of PLC books are introduced, so it is not introduced here, but it is important to understand the functions of various components. The instructions for the programming elements consist of two parts: the LD (functional meaning) X000 (component address), or LD X000, LDI Y000... It is. 3. Familiar with PLC basic instructions: (1) LD (take), LDI take back), OUT (output) instruc