薄膜非连续开卷张力控制建模、仿真与实验 Modeling, Simulation and Experiment of Tension Control in Film Non-Continuous Unwinding System.pdfVIP

电气传动和自动控制 !皇兰皇兰竺!!!!竺竺竺兰竺!竺 Electric Drive＆AutomaticControl 薄膜非连续开卷张力控制建模、仿真与实验 周春雷，陈建魁。尹周平 (华中科技大学数字制造装备与技术国家重点实验室，湖北武汉430074) 摘要：为了研究薄膜非连续开卷张力特性，以磁粉制动器为执行元件，建立非连续开卷张力系统动力学模型。利用MATLAB软件 同卷径和加速度条件下的张力波动。磁粉制动器非连续开卷张力实验结果表明张力波动周期性明显，张力波动值与加速度呈 近似线性关系，验证了非连续开卷张力模型与仿真的适应性。 关键词：薄膜输送；磁粉制动器；张力控制；非连续开卷；自适应PID控制 DOI：10．3969／j·issn．1000-3886．2013．03．004 [中图分类号]TM341 [文献标志码]A[文章编号]1000—3886(2013)03—0009—03 and ofTensionControl Modeling，SimulationExperiment inF¨mNon-Continuous UnwindingSystem ZHOU Chun—lei．CHENJian．kui．YIN Zhou．ping (State and KeyLaboratoryofDigitalManufacturingEquipmentTechnology， Hubei 430074，China) HuazhongUniversityofScienceTechnology，Wuhan orderto offilm Abstract：Inresearchthetensioncharacteristicsnon—continuous thesissets a modelofthe unwindingsystem，this up dynamic non-continuous withthe tensioncontrol brakeasexecutionelement．BasedonMATLABSimulink unwinding system magneticpowder and the PIDcontrol simulationresultsshowthenon·continuoustensioncurvewiththecharacters platformusingadaptive algorithm，the offast andsmall thesis thetensionfluctuationunderdifferent response。hishstability overshoots．Besides，theanalyzes winding diameterandacce