酒店办公楼施工经验（Hotel building experience）.docVIP

酒店办公楼施工经验（Hotel building experience） Large hotel and office building interior decoration project Light steel keel plasterboard, ete board, aluminum single board ceiling Construction management process and quality control First, the preparation work before the drawing review 1, the builder shall be within the scope of the condole top 2 days before the blue prints.the design of main girder, beam to verify the actual elevation of clear, and carefully recorded on the drawing, see if ceiling can according to the design elevation of the construction. 2. Check whether the ceiling plan and the size of the large sample are the same, and the material is consistent and clear. If there is a large drawing of the drawing, whether there is a material name not marked. Second, drawing review: the ceiling drawing will review the following items: 1. Whether there is installation positioning dimension on the ceiling diagram. 2. Whether the air return air port and the maintenance port and the fire sprinkler head will affect the installation of the lamps and lanterns. If there is no access to the design, determine the access to the water valve position according to the air conditioning drawing. 3. Installation of fire-control pipe and air duct of air conditioner, the lowest elevation of the fan disc shall meet the lifting of the ceiling in accordance with the elevation of the drawing. Whether the installation position of the fire control pipe and air conditioning duct and fan disk will affect the construction of the design ceiling. 4. Whether there is a construction drawing and detailed nodal diagram of the air outlet, the return air port, the inspection and maintenance port. No plans need to be designed. 5. The size of the ceiling plane is the same as that of the large sample. The size of the drawing shall be subject to the inconsistency. 6. Other problems that need to be coordinated with the facade decoration. 7. Do the above drawings and review the following work. Third, preparation o