展台材料（The booth material）.docVIP

展台材料（The booth material） Common materials for exhibition Time: 2009-6-8 11:52:05 source: original click: 120 Materials: wood, stone, metal, glass, ceramics, paint, plastic, synthetic materials, adhesive, metal products, textile materials, hardware accessories. 1. Timber: A, hardwood: willow, nanmu, fruit tree (flower pear), white wax, birch (neutral). Characteristic, the pattern is obvious, easy deformation is damaged. Should make furniture, make veneer, the price is high. B, cork: pine (white pine, red pine) paulownia, white poplar. Characteristic, make structure, wood, anti - rot, resistance to bending, cannot make furniture. C, synthetic wood materials: the exhibition industry is dominated by composite panels. * triplywood, the three-layer 1mm plank (or wooden skin) staggered, used to make furniture side panels and decorative materials (the pear, beech wood is so processed and made. The specification, 1220x2440mm / 20 ~ 45 yuan. * composite board, 5 per cent board, 9 per cent plate, used for structural, flexible. * large core board, to overcome the wood deformation, two boards of wood block, according to the materials of the filling of different prices. Often 15 ~ 18mm thick, 40 ~ 60 yuan or 120 ~ 150 yuan unit price. * wooden square, unified 4000mm long, white pine 1 m3, 1200 ~ 1500 yuan, red pine 1 m3, 1400 ~ 1600 yuan, beech wood 1 cubic meter 5000 ~ 6000 yuan. * compression board, particleboard (compressed with shavings sawdust), density plate (with greater pressure and adhesive compression, high pressure, used for furniture). It is not easy to nail, for fear of moisture. * composite board, 2. Stone: Granite (highest hardness, fine decorative pattern, commonly used), marble (not high hardness, large decorative pattern), qingshi, mashi, pebbles, rain and stone. 3. Metal materials: A, iron: * plank (iron plate), thick iron 2 ~ 200mm; Thin iron 1 ~ 2mm divided into black iron (black iron, Angle iron, can spray paint), galvanized sheet iron (anti-rust, can not sp