甲醇汽油调配（Methanol gasoline distribution）.docVIP

甲醇汽油调配（Methanol gasoline distribution） Vehicular methanol gasoline blending process and mixing method - mixing process mixing method - splash deployment: splash deployment and denatured fuel methanol is the component oil in proportion to quantitative load transportation vehicles in at the same time, the complete mixing in the process of canning. Besides the auxiliary charging device and metering instrument, this method is not required for other special equipment, which is widely used in foreign countries in the 1980s. Circulation stirring and mixing mixing is the mixing of the circulating pump in the mixing tank. The circulating process is used to mix the modified fuel methanol with the component oil. At present, this method is mainly adopted in China. - pipeline deployment pipeline is a combination of blending components oil and modified fuel methanol through computer and blending control equipment in the pipeline. This method is controlled by computer or preset equipment, high precision and convenient management. - mixing tank car deployment is to harmonic component oil tanker loaded tanker oil tank, then denatured fuel methanol in proportion to join car tank, in the process of transportation complete mixing, which does not need to change the existing charging device, in the process of charging tank car rearrangement of goods can be completed, at present, suitable for small gauge touch allocate, convenient and easy. Four, must pay attention to the problems in the industrialization application of methanol gasoline - 1. The oil tank, oil pipe cleaning check system components Because the vehicular methanol gasoline has strong dissolving properties and hydrophilic properties, therefore suggested that the vehicles for the first time use, best for oil tank, oil pipe system components for a preventive inspection and cleaning, to ensure that the fuel system of clean water. The driver can not carry out the cleaning of the vehicle himself, and recommends that the car repair