光电耦合器（photocoupler）.docVIP

光电耦合器（photocoupler） Photoelectric isolation anti-jamming technology and application Category: electronic comprehensive reading: 1217 In actual electronic circuit system, inevitably there are all kinds of jamming signal, if the bad anti-jamming ability of the circuit will reduce the accuracy of the measurement and control and produce misoperation, resulting in devastating consequences. Therefore, if some design techniques are adopted on the hardware, it can improve the anti-interference ability of the system effectively by destroying the interference signal into the measurement and control system. It has been proved that using isolation technique is a simple and effective method. Isolation technique is damage to interference channels anti-jamming method, hardware photoelectric coupler is commonly used to realize the electric - light - electric isolation, he can effectively destroy the entry of interference sources, to achieve reliable signal isolation, and easy to form a variety of function status. 1 introduction to optoelectronic coupler Photoelectric coupler are light-emitting device (such as light emitting diode) and photosensitive device (such as light activated triode) together, by the light coupling a light and light a electricity transformation of electrical devices. Figure 1 shows the schematic diagram of the commonly used triode photoelectric coupler. When the electric signal is sent to the input of the photoelectric coupler, the light-emitting diode is illuminated by the current, the photosensitive element is exposed to the light and the current is generated. When the input terminal has no signal, the light-emitting diode is not bright, the photosensitive triode is off, and the CE is not working. For digital quantity, when the input is low electron 0, the photosensitive triode ends, the output is high level 1; When the loser is high level 1, the phototransistor saturates the channel and outputs a low level 0. The temperature compensation and modulation requ