错误和警告解析1（Error and warning resolution 1）.docVIP

错误和警告解析1（Error and warning resolution 1） 1 the body surface segmentation error occurred: Boolean operation failed. Try adjusting the tolerance value on the BTOL commmand to some fraction of the Minimum keypoint distance. Model Size (current problem) 1.183933e+000 BTOL, setting 1.00000e-005, Minmum KPT distance 4.308365e-006 The first set up a working plane in place to split, split time with divided --volume by working Boolean plane, the main error may be willing to set tolerance is too small, At that time, tried several times had success, finally simply set up a body again, and drew a big face, finally succeeded. 2. a common representative error! The original virtual memory I set to no paging file, now system management, will not appear in the calculation of the memory is not enough. Error! Element type 1 is Solid95, which can not be used with the AMES command, meshing of area 2 aborted. People who just started learning often such mistakes, this is because the grid operation corresponds to different units of different types. The above said error is the element type for the Solid95 (entity type), can use the AMES command to mesh division. 3 Meshing of Volume 5 has been aborted because of a lack of memory. Closed down other processes and/or choose a larger element size, then try the VMESH command again. Minimum additional memory required=853MB (by kitty_zoe) You said not enough memory space, probably because the calculation unit you too much, increase the size of mesh, reduce the number or increase the minimum memory set (ansys10 in the customization Preferences menu bar storage can modify) The grid division you are too thin, lack of memory. The proposed model is divided into several parts, parts division, can reduce the memory usage, try! 4.The input volumes do not meet the conditions required for the VGLU operation No new entities. Were created. The VOVLAP operation is a possible alternative VGLU is two or more individuals stuck to a body between the intersection sh