油漆和地面工艺（Paint and ground craft）.docVIP

油漆和地面工艺（Paint and ground craft） Paint construction process flow Wood paint construction process flow 1. Main construction techniques (1) varnish construction technology: To grind sand paper polishing, clean up the wood surface mount embellish powder to polishing abrasive paper, with the first time be bored with child, and sand and the second time blow be bored with child, full of fine sand to besmear to brush oil color, brush varnish - the first times Look for color, refill putty, fine sandpaper grinding, brush the second varnish, fine sandpaper grinding, brush the third time varnish, polish the water sandpaper polishing back, waxing, polishing. (2) mixing paint construction technology: First clean the dust on the surface of the grassroots, repair at the grass-roots level to use abrasive paper drawn, knot place play color chip to render blow be bored with child, coating drying oil - the first is full blow be bored with child - polishing to besmear to brush the bottom coating, ground floor Paint dry, brush face layer, repair putty to repair, polishing brush clean the third time paint brush the second time paint - polish - the third time paint - polishing wax. 2. Construction points Construction specification of oil painting brush Polishing the grass roots is an important process of painting and painting, should first remove the dust from the surface of the wood, grease and other impurities to clean. It is also an important process for varnish painting, and the oil powder is applied to the surface of the wood, rubbing with the hand and rubbing the oil powder into the eye of the wood. Brush clear oil, hand hold oil brush to want easy nature, the finger gently force, move without loosening, the brush should prevail. Besmear brushs according to dip in the secondary, every time dip in less oil, operating more frequently, suitable brush requirements, in accordance with the first up after down, difficult before they are easy, first left after the right, after the first orde