第三代制砂机、液压圆锥是破碎机、反击式破碎机（The third generation sand making machine and hydraulic cone are crusher and counter crusher）.doc

第三代制砂机、液压圆锥是破碎机、反击式破碎机（The third generation sand making machine and hydraulic cone are crusher and counter crusher） The secret of daily maintenance of 1. sand making machine of the third generation The third generation of sand making machine used in the important mechanism for aggregate, cement, metallurgy and other industries, the use of construction for construction, road construction, especially the construction of the road, now the demand for high-quality aggregate is very large, coupled with the demand for natural sand, artificial sand by people of all ages, the third generation of sand making machine is power in providing quality aggregate aspects not. At the same time, for the maintenance of the third generation of sand making machine is necessary, only to the sand making machine made sand aggregate good, should pay attention to the experts in this ming to maintain you on the three generation of sand making machine of the things: Daily maintenance, a third generation of sand making machine is essential, must make the sand making machine has enough time to rest, and wear the regular inspection of parts, if it is found that the replacement of wear parts should be timely, so as not to affect the operation of the whole machine. The special attention is, in the third generation of sand making machine operation do not open inspection, in order to avoid unnecessary risks. Two, grease is essential. To add the amount of grease in the sand making machine 400 hours to work, a long time to remember to turn on the spindle for cleaning. Three, the transmission belt tension should pay attention to adjust. The adjustment of the transmission belt, to ensure the matching, the length of each group as consistent as possible. Four, because the third generation of sand making machine belongs to the high-speed operation of the equipment, in particular should Caution!, if the staff to repair, to cut off the power after maintenance. Regular on the third generation of sand making mach