激光打标机厂家（Laser marking machine manufacturers）.doc

激光打标机厂家（Laser marking machine manufacturers） A comparison, laser marking machine and other mark mode: 1. marking effect: fine and fine. Pneumatic marking machine is a kind of contact, on the machine when the force. The print needle with high frequency under the compressed air combat activities to print out the mark without a certain depth to the workpiece is. The effect is not very good, may have some small burr. Laser marking machine is a non-contact marking, deformation of the workpiece does not print, high precision, high surface smoothness for some products (such as stainless steel products, sanitary ware, bearings, etc.). 2. anti-counterfeiting effect: laser marking can play a good anti fake effect. Because of his price is relatively high, the fake people despite difficulties. Pneumatic can also play a very good anti-counterfeiting, we can use it to do something with the font, then print in our products. Anti counterfeit market -- laser marking can not be permanent, rubbing, hand touch concavity, anti-counterfeiting effect directly and significantly. At the same time, the development of the market of similar products abroad in recent five years, the anti-counterfeiting effect of laser printing has been widely accepted by domestic enterprises, the market has matured. Two, laser marking machine: According to the marking material into metal material and non-metallic laser marking machine, laser marking machine. Metal laser marking machine: semiconductor laser marking machine (end pumped and side pump), fiber laser marking machine. The laser marking machine: carbon dioxide laser marking machine. Laser marking machine principle: the light can cause chemical and physical changes of the surface material carved out marks, or burned part of the material through the light, show the desired etching patterns and characters. Three, the characteristics of laser marking machine: 1. a wide range of applications: laser marking machine marking in almost all materials. 2. high ef