楼梯规范（Stair code）.docVIP

楼梯规范（Stair code） The staircase design specification is a chapter of homing. Indoor staircase usually need to follow certain norms, in order to make people look comfortable, smooth, and durable and safe. Here are a few staircase design specifications for your reference: 1. Design standard for slope of indoor stairs Step angle is usually by the size of the space conditions of floors, the all-around to decide. The straight line and horizontal angle at the front of the stair pedal is called the slope of the stairs. The interior staircase has a slope of about 30, the most comfortable. The overall slope of an outdoor staircase is relatively flat. 2. Code for design of interior stair board The specifications of the stairs include the pedals and the vertical plate, which are generally adapted to the size of the sole of the foot. Generally pedal width, vertical board low step will be more comfortable. The pedal width of the indoor staircase should be no less than 24 cm, usually 28 cm, the most comfortable. The height of the vertical plate should be no more than 20 cm, generally 18 cm, the most comfortable. Also, the width of each pedal and the height of the vertical plate should be consistent, otherwise it will make people fall down. 3. Design specification for step size of indoor staircase Step length, that is, the width of the staircase. Indoor staircase steps generally 90 cm, that is, the provincial space, but also people walking comfortable. The staircase design specification although often mentioned, but not a definite indicator, are large enterprises to make stairs, the stairs and the convention industry, so that the staircase design specification is the so-called no specific industry standard setting. Staircase design should comply with the existing national standards building design fire code (GBJ16) and high civil building design code for fire protection (GB50045) of the relevant provisions. A staircase width not less than 1.10m. The six and six floor residential, o