3d建模基础（3D modeling Fundamentals）.docVIP

3d建模基础（3D modeling Fundamentals） [CAD] 3D: save as R14 format, 3D- import, group - change coordinates, right click - freeze, custom user interface color geometry freeze - black, setting - Options - to capture the frozen objects in Figure 1 []: making wall line - stroke only describes the inner wall (I: the cursor in the heart), extrusion: 2800-3000 note: version 09 and above: normal, right click the attribute on the back of vanishing, converted to editable poly - making [gate]: parameters: high 2000-2200 50 door 100 door frame beam height 2400 polygon - extrusion thickness 240-delete, freeze - line along the border to cancel capture U frame 50- extrusion profile 250, rectangular painting door - extrusion; beam bridge fabrication []: 600 parameters: the window sill beam 2600 side connecting 2 - adjust the height - polygon -delete making [sliding door]: parameter: edge The box width thickness of 100 50 50 40 of the thickness of the door frame width (door), the door frame capture point glass (plane), shift mobile []: copy the production ceiling parameters: draw a picture of the 1 CAD into the 3D- line, with additional, making [background]: wall extrusion parameters: L type frame thickness 100 TV background 100 decorative frame 20 L type: according to the background wall size rectangle - out mobile copy, the original rectangle into editable spline - (additional guarantee in the same plane), Boolean - difference set - extrusion (Figure 2 chamfer type backdrop: marquee, chamfer 10- by polygon) TV background: Rectangular - extrusion decorative frame: Rectangular - extrusion (for tensile - be converted into operating point, mobile edit polygon) replication in Figure 2 [] making wooden partition: Figure 2 parameters: thickness of 80 segment 1 partition thickness 10 U frame: from CAD to import plan - freeze out 80 rice U type frame, editable polygon face chamfering 10: rectangular painting shutter - mobile partition copy 43- out of 10, open the use of shaft center (in the vie