kt板（KT board）.docVIP

kt板（KT board） KT. KT is a KT board structure by PS particles generated by foaming the plate core, a new type of material through the surface film pressure and a plate body, crisp, light, non perishable, easy processing, and can be directly on the screen plate printing (screen printing plate, paint (paint) to detect adaptability) and mounted back additive screen and printing, widely used in advertising promotion, building decoration, packaging and other aspects of culture and art. Use in advertising a product promotion information is used for the exhibition and the notices in the mounting panel, is also being used in a lot of screen printing, especially suitable for a wide range of promotional activities to carry out unified. Composition structure The main ingredients are: polystyrene (English: polystyrene) Color plate core KT board are commonly used white and black, in fact, there are red, blue, yellow, green and other colors. However, there is no demand in general, so no manufacturers will go to the production. But there will be some of the export KT board color kt board. classification KT from the current production relatively mature technology can be divided into cold and hot composite compound, the two kinds of technology to produce our products corresponding to the call (cold composite plate) and cold plate (hot plate) hot plate. Cold plate The first is: raw material is foam plate core PS particles, but because of the cold plate are single core board, so to double the first foam, foam thickness is about 3.5mm, for half a month, then second times the core equipment in the foam, foam to the left and right 5.0-5.2mm, second may direct foaming after laminating glue. Then paste dough dough: the substrate is PVC, usually 0.08m-0.1mm, 0.9 x 2.4 is mostly used 0.08-0.1mm 1.2 * 2.4 pieces of dough plate 0.16mm is generally used to strengthen the stiffness of the plate, because the surface is PVC, PS is the core material, so the choice must be neutral in the dough and gl