8007 ACTION PLUS 8022 STEALTH CHRYSLER （克莱斯勒8007行动+ 8022隐形）.pdf

8007WND ACTION PLUS 8022WND STEALTH CHRYSLER “A” ENGINES INTAKE MANIFOLD INSTALLATION INSTRUCTIONS This instruction sheet is designed to cover a wide variety of vehicle applications. If your vehicle is not equipped with the items referred to in these instructions (EGR, transmission kick-down linkage, air conditioning, or power brakes), proceed to the next step. Thank you for choosing WEIAND® for your manifold needs. It is our concern that you follow these instructions carefully, so that you can achieve the desired results. Slight errors in installation can make a big difference in performance, mileage, and emissions. Warranty is void if proper installation procedures are not followed. PLEASE READ THE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION. IMPORTANT! Although all WEIAND® parts pass several inspections, it is imperative that the installer personally inspects the part before installation. Run a stiff wire through all passages while shining a bright light into it. Also, wash the part using mild soap and water solution. Check the fit on all bolt holes for proper alignment and thread any fittings in first by hand. Failure to perform these simple checks could result in engine damage and may void your warranty. APPLICATION: The WEIAND® manifolds (P/N 8007 8022) have been designed to fit the following Chrysler engines: C.I.D. Year Produced 273” 1964-1969 318” 1967-1992 340” 1968-1973