COIL GRABS FOR NARROW COIL GRABS （线圈抓住缩小线圈抓住）.pdf

BELOW-THE-HOOK EQUIPMENT COIL GRABS Bushman manufactures a complete line of coil grabs that have been engineered to meet a variety of dimensional, capacity and special application needs. Quality-built throughout, these lifters will provide years of continuous, safe and efficient coil handling. Bushman manufactures coil grabs with heavy steel weldments. They feature: telescoping, motor-driven legs; formed, curved saddles on the lifting surfaces, and limit switch in the lifting pad to prevent accidental opening under load. Optional features that enhance lifting efficiency and protect the coil include:  Motorized rotation.  Photo eyes to help position the grab on the center of the coil.  Limit switches at ends of leg travel.  Full length pads on all coil contact surfaces.  Rubber or steel toe and heal rollers in the lifting feet.  Built-in weigh scales with on-board or remote display. Bushman coil grabs are designed according to the latest revisions of ASME Specifications B30.20 and BTH- 1, Design of Below-the-Hook Lifting Devices. Bushman coil lifters can be equipped with weighing systems to weigh coils during the lift. This saves time by not having to use a separate floor scale. Features include: