Commercial, Aerospace Structural and Certified （商业、航空航天结构和认证）.pdf

Commercial, Aerospace Structural and Certified Welding and Brazing Capabilities Whatever your requirements, HTG Brite Braze is a Welding Specialist that has the capabilities to serve as your company’s needs in the area of aerospace Brazing. Heat-treating and Welding, Several of our customers have become concerned that our pricing will become higher for jobs requiring Nadcap. That will not be the case for jobs that were previously quoted to Aerospace specifications. However, if we did not know the end use of the part or ultimate customer and we quoted to commercial rates; rest assured the price will be raised. All Aerospace welded WILL REQUIRE Documented Procedures: A documented procedure requires a procedure to be established, documented, implemented, and maintained. In addition to the documentation, all incoming components now require incoming inspection for dimensions and tolerances prior to start of the welding operation. Also, advanced operator training is required for each part number in the area of dimensional inspection of component parts and inspection tooling. Engineering sign off of all documents per part number is required. These additional steps, as well as, additional time required for contract review of every job will also add to the cost. In order to properly communicate the scope of our work and the additional engineering time required to proceduralize all methods and techniques, we have included the following information: Best Practice: Certification to Program Standards The Nadcap certification for, welding, heat treating and brazing requires both documented procedures and process control. HTG found that many of the requirements of the certification were already in place as a result of its efforts in obtaining ISO 9001:2000 and: 2008 and AS 9100:2001 certifications and has resulted in an increased demand for engineering intervention during job development as well as Contract Revie