Cherry rivetless Nut Plate ProCess MaNual（樱桃rivetless螺母板加工手册）.pdf

Cherry® rivetless Nut Plate ProC ess MaNual SPS Fastener Division, a PCC Company Co Nte Nts Benefits 1 How the Rivetless Nut Plate Works 2 Numbering System 3 Rivetless Nut Plate Selection 4, 6 Rivetless Nut Plate Installation Tooling 6 Pulling Heads Adapters 8 Tool Selection Chart 9 Hole Preparation 10 Rivetless Nut Plate Installation 11 Inspection 12 Removal 13 Replacement 14 Things to Know 14 rivetless Nut Plate BeNefits Cherry® Aerospace provides a new approach to nut plate applications. The Cherry® Rivetless Nut Plate is a replacement for standard riveted nut plates. It features a retainer that does not require flaring to meet NASM25027 torque-out and push-out requirements and eliminates the need for two additional rivet holes, as well as reaming, counter-boring and countersinking steps. BeNefits: uninstalled rNP • Meets or exceeds NASM25027 • Fast, reliable installation with lower installed cost • Requires only a single drill-quality hole • Eliminates rivet setting or blind rivet installation • Available in a variety of configurations and sizes • Designed to be installed with conventional blind rivet tooling • Light weight A single drill-quality hole replaces the 3 holes required for a conventional riveted nut plate. Additional labor savings are achieved by the elimination of rivet setting or blind installed rNP rivet installation required by the conventional nut plate. The Rivetless Nut Plate design features a retainer shank with lobe formations that resist torque out and push out forces, without cutting into the base material. The Rivetless Nut Plate is a precisely manufactured product incorporating a retaining clip (used in replaceable nut element versions), a nut element, a retainer, and a mandrel.