Coupled Inductor Design Optimization for Fast （耦合线圈优化设计用于快速）.pdfVIP

Coupled Inductor Design Optimization for Fast-Response Low-Voltage DC-DC Converters Jieli Li C. R. Sullivan Found in IEEE Applied Power Electronics Conference, Mar. 2002, pp. . c 2002 IEEE. Personal use of this material is permitted. However, permission to reprint or republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. Coupled-Inductor Design Optimization for Fast-Response Low-Voltage DC-DC Converters Jieli Li Charles R. Sullivan Aaron Schultz Thayer School of Engineering, Dartmouth College Jieli.Li@dartmouth.edu Charles.R.Sullivan@dartmouth.edu Abstract—Multiphase voltage regulator modules (VRMs) for micro- two-phase interleaved converter can effect a reduction in rip- processor power delivery with coupled output inductors are discussed. ple. Unlike the ripple cancellation in an uncoupled multiphase Strong coupling is shown to be feasible and effective at reducing ripple if the correct magnetic topology is used. For more than two phases, this can converter, this ripple reduction extends to the current in the in- be a “ladder” core with windings around each rung. Typical ripple re- ductor windings and in the switches. In [10], one topology for duction is better than a factor of six with no effect on response time. One coupling larger numbers of inductors in a multiphase VRM is can also chose to improve response time while still significantly reducing considered, but is not found to offer major advantages. ripple. A simultan