Design And Fabrication Reference Guide Total （设计和制造的参考指南,总）.pdfVIP

Design And Fabrication Reference Guide [PLASTICS OVERVIEW π The World’s Leading Manufacturer of Plastic Stock Shapes. The Quadrant Design Fabrication Reference Guide was developed to assist materials specifiers, designers, and fabricators in the use of engineering plastics. Although the content of this guide is primarily intended to facilitate the use of engineering plastic stock shapes for machined parts, much of the information presented here may be applied to plastic parts processed via alternative methods such as injection molding. This reference is divided into four sections. The first section provides an overview of plastics as engineering materials, basic design considerations, and an introduction to commonly used physical properties. The material selection section is a step-by-step guide to selecting plastics based upon specific application requirements, including the need for chemical resistance and FDA, or other regulatory agency approval. The component design section contains guidelines for designing plastic bearings, wheels, sheaves and gears. The final section discusses fabrication guidelines to facilitate machining of plastic stock shapes, and answer frequently asked fabrication questions. This brochure does not include detailed Quadrant product descriptions or phy