面向轮胎花纹的逆向层次化建模.pdfVIP

第29 卷 第4 期 计算机辅助设计与图形学学报 Vol. 29 No.4 2017 年4 月 Journal of Computer-Aided Design Computer Graphics Apr. 2017 面向轮胎花纹的逆向层次化建模 1) 1) 1) 2) 2) 2) 董玉德 , 陈进富 , 张荣团 , 白苏诚 , 刘彦超 , 张方亮 1) (合肥工业大学机械与汽车工程学院 合肥 230009) 2) (佳通轮胎( 中国)研发中心 合肥 230601) (dydjiaoshou@126.com) : 针对轮胎逆向建模过程中存在操作烦琐且不规范的问题, 提出一种基于逆向特征的轮胎花纹层次化建模方 法. 该方法在对轮胎花纹造型特征研究的基础上, 首先将轮胎花纹分解为具有层次性的知识元, 然后按照特征驱动 的执行机制驱动点云到不同层次知识元的特征点, 进而驱动特征点到知识元, 并最终实现由知识元到模型的过程. 为将该方法付诸于应用, 以 CATIA/CAA 为二次开发平台, 并结合数据库技术开发出一套轮胎花纹逆向智能建模系统. 实例分析表明, 该系统不仅提高了轮胎逆向建模的效率, 而且规范了建模流程. ：轮胎花纹; 逆向工程; 层次化建模; CATIA/CAA ：TP391.41 Tread Patterns Oriented Reverse Hierarchical Modeling Dong Yude1), Chen Jinfu1), Zhang Rongtuan1), Bai Sucheng2), Liu Yanchao2), and Zhang Fangliang2) 1) (School of Mechanical and Automotive Engineering, Hefei University of Technology, Hefei 230009) 2) (GITI Tire(China) RD Center, Hefei 230601) Abstract: Aiming at the existing problems of trivial and irregular operations in tire’s reverse modeling, this paper proposes a tread pattern’s hierarchical modeling method based on tire’s reverse features. Firstly, the tread pattern is broken up into hierarchical knowledge elements in view of its formal features. Secondly, according to the fea- ture-driven mechanism, feature points in different levels of knowledge elements are extracted from the point cloud, and then the feature points are processed to recognize the corresponding knowledge element. Finally, the process from knowledge elements to the model can be realized. Furthermore, in order to apply this method to the application, we developed an intelligent tread pattern reverse-modeling system, which integrates database tech- nology and uses CATIA/