校直机系列产品（Straightening machine series products）.docVIP

校直机系列产品（Straightening machine series products） Straightening machine: Straightening machines are the devices we use frequently. Lets learn how to operate them together: 1) keep the equipment clean and the workbench clean. 2) familiar with equipment operating procedures. 3) when clamping workpiece, keep the top hole clean, if dirt should be cleaned in time. 4) according to the length of the workpiece, properly select the distance between the two centers, not only to make the clamping workpiece effortless, but also in the pressure, the workpiece does not fall off. 5) adjust the distance between the head and the workpiece according to the size of the workpiece. 6) the operation should be slow pressure, can not be pressurized too much, especially the workpiece after quenching, easy to break, should be more careful. 7) dont stand on both sides of the straightening machine, dont put other things, to prevent the workpiece fracture injury or damage to goods. . 8) in V iron base straightening short normalizing and tempering bar, should pay attention to whether there is a legacy of the two ends of the work piece burr blanking and flash, if timely on the wheel to get rid of or remove the file manually, remove before straightening. Two position straightener: Each product has the corresponding instructions and the process of the product, the daily maintenance can make the product use for a long time, and the efficiency is higher. Through the following aspects to introduce the use and maintenance of double station straightening machine: 1, two station straightening machine in the boot when you need to meet what conditions: three-phase electricity, plus enough gear oil and butter; 2, manufacturers remind the machine in the factory, the outside of the screws are adjusted, and can not be adjusted to its discretion; 3, to ensure better assurance of duplex straightening function more durable and stable operation, please read carefully the use of this product that after the operation,