模具工艺（Die technology）.docVIP

模具工艺（Die technology） I. noun interpretation Process: process is the basic unit of process engineering. A part of a process in which a worker (a group or group of workers) performs continuous work on one or both of the pieces at a fixed place of work. Step: when the speed of the machined surface, the cutting tool and the amount of cutting is the same as the feed rate, the part of the process is called the step. Polarity effect: the phenomenon of material degradation due to the difference of positive and negative electrodes. The structure of cold stamping die parts: refers to the mold parts in the stamping process to meet the premise, its structure is easy to manufacture, assembly and maintenance, etc.. Forming grinding: the outline of parts is broken up into several lines and arcs, and then grinding according to a certain order, so as to achieve the technical requirements of the drawings. Electrical parameters: in EDM, the electrical parameters such as voltage, current, pulse width, gap, etc. are called electrical gauges. Two. Jane answers The application of copying machining: profiling turning, profiling milling and profiling grinding. The basic principle of electrical discharge machining (EDM) is to utilize the electrical decay phenomenon between the workpiece and the electrode during pulsed discharge, and to control the workpiece material in a controlled manner so as to meet the requirements of a certain shape, size and surface roughness. The basic factors affecting the speed of EDM are the polarity effect, the influence of pulse parameters on electrical erosion, the influence of pulse width on electrical erosion, and the influence of thermal constants of materials on electrical erosion. Commonly used electrode materials: pure copper, brass, graphite, steel, cast iron, copper tungsten alloy and so on. Electrode form: integral, inlaying and combination. Electrical gauge selection: according to the technical requirements of the workpiece, electrode and workpiece mat