网线插座 接线法（Wiring method）.doc

网线插座 接线法（Wiring method） 1, added before, the wiring should be T568A or T568B standard to connect. The connection of T568A is: green, white, green, orange, white, blue, blue, white, orange, brown, white and brown The connection of T568B is: orange, white, orange, green, white, blue, blue, white, green, brown, white and brown The difference between A and B is that the positions of lines 1 and 3, line 2 and 6 are interchangeable. I usually used to use B standard wiring, all modules, crystal head is B standard, when you need to do anti jumper, it makes A standard, this is not easy to confuse. 2, wear the line, be sure to use the label paper mark on the network, otherwise the cable is more than one, it is not clear where it came from the line. 3, the family network distribution IP, according to the number of computers in the home network is not much, so the use of C address, C address is called the common 192.168.XXX.XXX, XXX representatives from the 0-255 of an arbitrary number, let the best a XXX setting for all computers, such as 192.168.1.XXX so, all computers on the same network segment. Secondly, in view of the fact that the home network usually does not have subnets, the annotation method without subnet is adopted, that is, the subnet mask is 255.255.255.0. If you use a router or proxy server, you need to set up the gateway and the DNS. Recently, our renovation is nearing completion, only to connect the electrical power panel. He wont pick up the weak (that is, cable, telephone lines and other information) panel, I also installed an integrated information box. I only own installation, was full of confidence, but when do find themselves is a only know theory do not dabbler. So, I attach great importance to this practice, serious information module and the crystal head connection is summarized. Share with you. Detailed description of twisted pair connection 1 twisted pair (RJ45) pin number definition Standard connection method for 2 10M twisted pair Standard connect