投影机常见故障判断（Common fault judgment of projector）.docVIP

下载本文档

7
0
约1.66万字
约 11页
2017-08-15 发布于河南
举报
版权申诉

投影机常见故障判断（Common fault judgment of projector）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

投影机常见故障判断（Common fault judgment of projector）

投影机常见故障判断（Common fault judgment of projector） Common fault judgment of projector 01.LCD projector consists of main power supply, lamp power supply, main board, LCD driver board, LCD panel, bulb, optical system and lens. brLCD projector, also known as analog machine, mainly consists of three liquid crystal imaging. 02.DLP projector consists of main power supply, lamp power supply, conjoined optical system, main board and DLP imaging lens. DLP projector also called digital projector, mainly by color imaging. 3 projector whole machine is not power: the power is broken, can not power to the main board, this kind of situation can not work (60%); if the motherboard fails, will also be unable to indicate. (40%) 4 what is the reason that the projector bulb is not on? The light bulb is broken, causing the light to fail; the light supply is broken and may not turn on. The main board is broken or the driving power is defective, or it may not be bright. 5, the motherboard is a system of low power work, when it power to a part, any power supply is not normal, will have different reasons. Whats the cause of the br06. projector protection and the bulb indicator light on? The bulb is useless; there is a problem with the protection system; there is a problem with the motherboard or temperature control 7, video, no RGB signal or no video or no RGB signal. The general situation is the signal is electrified, the grounding is bad, and causes the video plate channel to be burned; the video board or the RGB board account for 50%, the motherboard reason accounts for 50%. 8 pictures have bars on what is the reason? If there is a monochromatic bars, LCD driver board damage damage to 80%, accounting for 20%; if there is color bars is generally the motherboard reasons accounted for 70%, the second is the liquid crystal board and driver board. (30%) 9, the projector installed the bulb, brightness is not enough, what is the reason? br 500-800 lumens brightness machine installed in the new bulb,