手机相关词汇（Mobile phone related words）.docVIP

手机相关词汇（Mobile phone related words） Bypass capacitor is not a theoretical concept, but a practical method that is often used. An electronic tube or a transistor needs to be offset, that is, the DC power supply that determines the operating point. Such as gate tube with negative pressure relative to the cathode are required, in order to work in a DC power supply, the cathode to connect a resistor formed on the cathode current positive potential with a plate, and a gate bias DC grounding, this technique is called self bias, but is on (AC) signal, which is also a negative feedback, in order to eliminate the influence, in this resistor in parallel with a sufficiently large capacitance, which is called the bypass capacitor. The capacity of capacitor UF, electrolytic capacitor tantalum capacitor or the like, his inductive, resonant frequency of small, low frequency signal through better, and the high frequency signal, showing a strong inductive impedance is large, at the same time, large capacitance can also play the role of local charge pool, can reduce the interference by local out power coupling; capacity of 0.001~0.1uf capacitor, ceramic capacitor or general mica capacitors, low inductance, high resonance frequency, low impedance of high frequency signal, can provide a bypass for high frequency interference signals, reduce outside of the local coupling interference. Go to the lotus is guaranteed stable output output (mainly for the device work) a small pond, to ensure the power supply fluctuation range will not affect the operation of the circuit in other large current work; add a point is called coupling: high frequency switch noise signals before and after class and do not affect each other components of active devices work at all levels in the static switch will be along the power line communication. The primary function of the decoupling capacitor is to provide a local DC power to the active device to reduce the spread of the switching noise on the board and to gui