注意的电源线路改造问题（The power line reconstruction problems）.docVIP

注意的电源线路改造问题（The power line reconstruction problems） Because of work reasons, I went to check the line of two hundred or three hundred people in the home, in the street you are facing the real estate TX start on the occasion, the problem under the summary, in order to you can reduce unnecessary losses and risks in power transformation: 1 socket. Circuit breaker. The leakage protection switch. Local wiring row into the household distribution box of the connection hole fixing screws are not tightened, caused by the local heating wiring hole burning, so remember to urge workers to put the screws tightened. 2 lighting line because the line diameter is fine, and the ceiling is not good slot, so some construction team will line directly buried in the wall (it only cut through the mortar layer), after skin aging caused by direct line to ground short circuit, and easy maintenance and replacement, so the line (including other lines) to the absolute casing. 3 some deep application bottom box where he put a shallow box, causing many lines together, bad installation panel, and increased after the thread loosening and short-circuit opportunity. After the 4 odd position of switch socket is removed, the original bottom box within the joint should be installed in the bottom box, a white cover, for inspection and maintenance (the mouth slightly affects the appearance, but absolutely useful, can buy some beautiful white cover). But I found a lot of construction team have put the original bottom box sealed with cement mortar, which after the line when there is a problem difficult to check the cause and must zaoqiang. 5 in the wall surface hole, to see the alignments, otherwise it will interrupt the power line pipe line and wounded inside, such as interrupt it (due to the protection of the switch will trip or line loss of power, can be found), if wounded, sometimes is not out of the reaction on the spot, but in the days after the will you become a great risk. After water reform must let