基于光谱的多级多色打印系统基础线性化模型-包装工程.PDFVIP

包 装 工 程 第 37 卷 第 17 期 ·196 · PACKAGINGENGINEERING 2016 年 9 月 基于光谱的多级多色打印系统基础线性化模型 方恩印 1,2 ，杨晟炜 1,2 ，李春梅 1,2 （1.上海出版印刷高等专科学校，上海 200093 ；2.上海出版传媒研究院，上海 200093 ） 摘要： 目的 研究一种新的基础线性化算法，优化多级多色打印系统模型。方法 分析现有的用于多 级多色打印系统基础线性化算法存在的问题，并针对这些问题从多级墨量比例系数的确定、单通道 控制、总墨量控制、网点级别转换和线性化等 5 个方面提出一种基于光谱的多级多色打印系统基础 线性化模型。结果 该方法的色域体积约为 EFI 流程控制的 109%，在色域空间中的分布更加均匀， 喷墨量约为 EFI 流程的 50% ～85%。结论 新基础线性化算法在保证打印设备色域最大化的同时， 可实现各基色墨水的最佳利用。 关键词：基础线性化；多级多色；颜色再现 中图分类号：TS801.3 文献标识码：A 文章编号： 1001-3563(2016)17-0196-06 Basic Linearized Model Based on Spectrum in Multi-Level and Multi-Color Printing System FANG En-yin 1,2, YANG Sheng-wei 1,2, LI Chun-mei 1,2 (1.Shanghai Publishing and Printing College, Shanghai 200093, China; 2.Shanghai Research Institute of Publishing and Media, Shanghai 200093, China) ABSTRACT: It aims to study a new basic linearization algorithm that can optimize the model of multi-level and mul- ti-color printing system. The defects of existing basic linearization algorithm were studied by using the multi-level and multi-color printing system. A basic linearized model was put forward based on spectrum in such five steps as the deter- mination of proportional coefficient in multi-level ink, single channel control, total ink coverage control, dot level con- version and linearization. The color gamut volume of this method was about 109% of EFI workflow. The distribution of spectrum in the color space was more uniform and the amount of ink was about 50% ～85% of EFI workflow. In concl