ICEM 拓扑结构.docxVIP

ICEM CFD- HexaICEM?2008-05-08 05:34:43?阅读105?评论0??字号：大中小?订阅The user has access to two categories of entities during the mesh generaton process in AnsysIcem CFD:?block topology and geometry.? For symmetric models, topology transformations such as translate, rotate, mirror, scaling and translate and rotate are available.ICEM cfd blocking provides a?projection-based?mesh generation enviroment where, by defaut, all block faces between different materials are projected to the closest CAD surfaces. Block faces within the same material may also be associated to specific CAD surfaces to allow for definition of internal walls. In general, there is no need to perform any individual face associations to underlying CAD geometry, greatly reducing time for mesh generation.Mesh generation with blocking-overall process1 create or import geometry using any of direct, indirect or faceted data interfaces.2 interactively splict blocks, discard unused blocks to capture underlying shape: top down and bottom up.3 Associate edges to capture hard features.4 Assign mesh sizes such as maximum element size, initial element height and expansion ratio to surfaces and or curves.5 Automatically generate mesh.6 Write output files to the desired solvers.If necessary, the user may always return to previous steps to mainipulate the blocking if the mesh does not meet the desired qulity or if the mesh does not capture certain geometry feature.At any point in this process, the user can generate the mesh with various projection schemes such as full face projection, edge projection, point projection or no projection at all.?( not understand)The blocking database will have an extension of .blk. Vertices, edge, faces, blocks.Unstructured Mesh OutputThe unstructured mesh output option will produce a single mesh output file (*.uns) where all common nodes on the block interfaces are merged, independent of the number of blocks in the model.? Unstructured elements are defined by node number definition.Multi-Block