mapgis教程（MAPGIS tutorial）.docVIP

mapgis教程（MAPGIS tutorial） How to insert MAPGIS graphics into word, Excel, PowerPoint - First, take the MAPGIS menu other - OLE copy, then open word and click paste. The -Mapgis data is copied into the word document. - - Two, hollow word format - When using a hollow character, the font uses a negative number corresponding to the font number. For example: -3 means boldface hollow words. - Three. Consolidation area - 1, you can open a window on the screen, the system will be all areas of the window merge, merge the back of the graphics parameters and attributes, and the left button when the area is the same. - 2, you can also pick up the area to be merged with the selection function in the menu, and then use the merge area function to implement. - 3, you can also click on the cursor with a zone, and then press and hold the CTRL button, click on the adjacent area with the cursor. - - Four, flip graphics - In other Mapgis transformations in the following chart, the X ratio of the proportional parameter is determined by entering -1 in the input method -1 or Y scale. - 02885332272 Five, CAD into MAPGIS- 1. save the CAD file in 2004/2000DXF format. - 2. in the MAPGIS main program, select file conversion. - In 3. input, select to DXF file, confirm and reset - 4. save the dotted line file (the surface cannot be converted) Six, MAPGIS into CAD- 1. in the MAPGIS main program, select file conversion. - The 2. point line were loaded into the file, and select the reset. - 3. output select graphic input part DXF to select and determine. - 4. open the saved DXF file, use CAD reset to display graphics, and change the font style. - 5. save in CAD format. - Seven, how to convert JPG format to MSI format - The image analysis module, image processing. Inside: File: data input, data type conversion (JPG) - add files - conversion after the image file format for MSI mapgis! Convert to MSI file format, and then import, edit, import, vectorization. - Eight, in the computer how to make a sect