北岭地震和贩神地震后美日钢框架节点设计的改进（To improve the Northridge earthquake and after the earthquake in Japan. The God of steel frame joint design）.doc

北岭地震和贩神地震后美日钢框架节点设计的改进（To improve the Northridge earthquake and after the earthquake in Japan. The God of steel frame joint design） To improve the Northridge earthquake and after the earthquake in Japan. The God of steel frame joint design Abstract: the damage of steel frame beam column joints caused by the 1994 Northridge earthquake and the 1995 japan earthquake limit God, bad reasons, design improvement measures, similarities and differences of the two countries and our country construction related countermeasures. Key words: steel frame; seismic damage; node design; lining plate 1. Preface January 17, 1994 in the United States of California San Fernando Valley Northridge earthquake (Northridge Earthquake) and it was just a year after January 17, 1995 in southern Hyogo Prefecture in the Kobe earthquake (Hyogoken-Nanbu Earthquake) is the two land type earthquake caused extensive destruction of welded steel frame with beam column joints of. After the earthquake, the two countries carried out a large number of investigations and studies, and revealed the cause of the damage. Based on this, technical measures for improving the design of the steel frame joints were put forward. The two countries have published many papers during this period, and the discussions have opened up peoples vision and provided more understanding of the design of the steel frame joints, which has far-reaching influence on the design of the steel frame joints in the future. We have been entrusted by the China Academy of Building Research Institute for earthquake prevention. We have collected, collated and summed up the relevant materials, and now we introduce the main contents. 2. the destruction of steel frame joints in America and Japan The damage of steel frames in the two countries is mainly focused on the beam column joint, so the Liang Zhu mixed connection is the main object. Mixed connection is a kind of field connection, the beam flange and column with full penetration butt weld connect