高层建筑抗震设计中短柱问题的处理[转自 偶路的博客]_ybbxk的建筑结构（Treatment of short column problems in seismic design of high-rise buildings [building structure of blog]_ybbxk of self turning Road）.docVIP

高层建筑抗震设计中短柱问题的处理[转自 偶路的博客]_ybbxk的建筑结构（Treatment of short column problems in seismic design of high-rise buildings [building structure of blog]_ybbxk of self turning Road） Treatment of short column problems in seismic design of high-rise buildings [building structure of blog]_ybbxk of self turning road.Txt Building structure / short column problems in seismic design of high-rise building since the turn of the road I blog]_ybbxk learning architecture Baidu garden space | Baidu home | sign ybbxk learning structure learning The home page blog album | personal files | friends see article Treatment of short columns in seismic design of high-rise buildings [blog]2008-10-17 09:30[sharing] handling of short columns in seismic design of high-rise buildings Abstract: seismic design of buildings has a definite ductility requirement for structural members. The axial compression ratio and shear span ratio are the two most important factors affecting the ductility of members, and they are also contradictory factors. Key words: high-rise seismic short column 0 Introduction When the storey height is constant, the column cross section increases with the decrease of axial compression ratio in order to increase ductility, and the smaller the axial compression ratio is, the larger the cross section is, while the increase of cross section leads to the decrease of shear span ratio and the ductility of the component. Therefore, in the design of high-rise buildings, especially super high-rise buildings, in order to meet the requirements of the rules [1] on the axial load ratio limit, the sections of columns are often large, and short columns or even short columns are often formed at the bottom of the structure. In addition, such as library stacks, low storey storage rooms, underground garage of high-rise buildings and so on, due to the large load and lower storey height, short columns are inevitable in the design. As everyone knows, the ductility of short column is very poor, especially ult