电气工程及其自动化专业必备知识（Essential knowledge of electrical engineering and automation）.docVIP

电气工程及其自动化专业必备知识（Essential knowledge of electrical engineering and automation） 1, three-phase alternating current: an electric system consisting of three alternating circuits with the same frequency, amplitude, amplitude, phase difference, mutual difference of 120 degrees angle, called three-phase alternating current. 2. Primary equipment: equipment directly related to the production of electrical energy and power transmission and distribution is called primary equipment. It includes all kinds of high voltage circuit breakers, isolating switches, buses, power cables, voltage transformers, current transformers, reactors, arresters, arc suppression coils, shunt capacitors and high voltage fuses. 3 and two equipment: auxiliary equipment for monitoring, measuring, controlling, controlling and protecting primary equipment. Such as various relays, signal devices, measuring instruments, recording and recording devices, telemetry and remote signaling devices, various control cables, and small buses. 4, high voltage circuit breaker and high-voltage switch, it can not only cut off the load current and load current high voltage circuit or closed, and when a fault occurs, the effect of the relay protection device, cut off the overload current and short-circuit current. The utility model has the advantages of perfect arc extinguishing structure and sufficient interrupting capacity. 5 、 load switch: the structure of the load switch is similar to the secret isolating switch, but only a simple arc extinguishing device is installed. It also has an obvious disconnection point, has a certain ability to break down, can b