硬盘基本参数（Hard disk basic parameters）.docVIP

硬盘基本参数（Hard disk basic parameters） First, capacity As the data memory of a computer system, hard disk capacity is the most important parameter. The capacity of hard disk in megabytes or gigabytes (MB) (GB) as a unit, 1GB=1024MB. But the hard disk manufacturers in the nominal hard disk capacity usually take 1G=1000MB, so we see in the BIOS or in the hard disk capacity will be lower than the nominal value of small manufacturers. Hard disk capacity index also includes a single platter hard drive capacity. The so-called single disc capacity refers to the hard disk of the monolithic single disc capacity, greater capacity, the unit cost is lower, the average access time is short. For users, the capacity of hard disk like memory, always too never too much. Windows operating system brings us in addition to more simple operation, but also brought the file size and number of expansion, some applications frequently eat hundreds of megabytes of disk space, but also the increasing trend. Therefore, in the purchase of the hard disk when the appropriate lead is wise. The hard disk is the mainstream in recent years 80G, which has more than 160G large capacity hard disk began to spread. Under normal circumstances the hard disk capacity is more big, the byte unit price will be cheaper, but beyond the mainstream capacity hard disk slightly exception. At the beginning of December 2008, 1TB (1000GB) of the Zhongguancun Seagate offer is $700 yuan, 500G hard disk is about $320. Two, speed Speed (Rotationl Speed or Spindle speed), is the rotational speed of the motor shaft within the hard disk, the hard disk is the maximum speed can be done in a minute. The rotating speed of the hard disk is one of the important parameters indicating the grade, it is one of the key factors to determine the internal hard disk transfer rate, directly affects the speed of hard disk to a great extent. The hard disk file for higher speed, the higher the speed of the hard disk, the transmission speed is also imp