航模电池选择（Model cell selection）.docVIP

航模电池选择（Model cell selection） Battery classification Type of rechargeable battery is more, but the above requirements used to model the energy density, light weight, large discharge current, the main use of nickel cadmium battery, nickel hydrogen battery and lithium ion battery. The internal resistance of battery is low, the use of guard against short circuit, or may cause burns, fire. Nickel cadmium batteries (Ni-CD) are mainly characterized by excellent large current discharge performance, meet the requirements of high power short time. The rechargeable battery is an important performance index of discharge rate. The discharge rate, refers to the maximum continuous discharge current of the battery with nominal capacity current ratio (C). C stands in a small discharge current or current nominal capacity is 1C. Usually expressed in capacity of C before adding a number. For example, a 1800 Ma battery discharge rate was 10 C, which represents the maximum continuous discharge power of 18A, the visible discharge rate is an important indicator to measure the battery quick discharge performance. Because of the difference of the production process and the structure of the battery discharge rate, different brands have different. Domestic nickel battery is generally 6C~12C, usually imported batteries should be higher, especially the dynamic battery model aircraft, often up to about 20C, excellent SANYO battery even over 40 C. The first choice is to choose the battery discharge rate of the battery with high. But the nickel cadmium battery energy density is small, and the memory effect, relatively large waste batteries on the environment pollution, will soon be eliminated, currently only for large output current applications. NiMH rechargeable battery (Ni-MH) is a kind of environmental protection, the use of performance and charging as well as nickel cadmium battery, the nominal voltage is 1.25 volts, but higher power density, has on many occasions to replace the nickel cadmium