自建房2（Build a house 2）.docVIP

自建房2（Build a house 2） HRB400 grade and HRB335 grade steel refers to the current national standard hot rolled ribbed bar in GB1499 HRB400 and HRB335 steel bars for concrete reinforcement; HRB400 is usually said three grade steel, is usually said HRB335 grade two steel The tensile strength design value of HRB335 310n/mm2 The tensile strength design value of HRB400 360n/mm2 Not a bad question General grade two steel used for beam column, steel plate for level three There are three small diameter steel, such as diameter of 8, 10. But no two grade steel. A threaded steel In the construction industry, grade II and grade III steel rebar is used as the new standard, grade II steel, called HRB335, known as HRB400 grade steel, Hot rolled ribbed steel grades by HRB and the minimum yield point value of brand. H, R, B respectively (Hotrolled), hot rolled ribbed steel bar (Ribbbed), (Bars) three words English first letters. Hot rolled ribbed bar is divided into HRB335 (old No. 20MnSi), HRB400 (20MnSiV, 20MnSiNb, 20MnTi type). Under normal circumstances, the theoretical weight of several steel bars, the diameter and length of nominal are equal under the condition of the same. Steel bars for concrete reinforcement is straight or strip steel plate reinforced concrete reinforcement steel, its shape is divided into round steel bar and deformed steel two, straight and coiled state for delivery two. Round bar is in fact the ordinary low carbon steel small round and round. The surface deformation of reinforced ribbed steel bar, usually with 2 longitudinal ribs and transverse ribs along the length direction of the uniform distribution. The transverse rib shape is helical, herringbone, crescent 3. With the nominal diameter in millimeters. The nominal diameter of the deformed reinforcing bar round steel bar is equivalent to the same cross section. The nominal diameter of steel is 8-50 mm, the recommended diameter of 8, 12, 16, 20, 25, 32, 40 mm. Steel: 20MnSi, 20MnV, 25MnSi, BS20MnSi. The m